多边形棒状透镜出端辐射均匀性的研究

研究了用多角形棒状透镜产生高均匀性正方形和圆形照明的最佳结构参量.结果表明,对于正方形棒状透镜,输出端的照明均匀性随透镜的长度振荡变化,在某些特定长度达到极小值.对于圆形照明面积,比较了从三角到八角的六种多边形.利用三角形积分透镜可以获得最佳的照明均匀性,但光能利用率相对较低,六角形积分透镜可同时获得较高的照明均匀性和光能利用率.     

直流稳压电源波形演示器制作说明

直流稳压电源可以将交流电压变换为直流电压,并使之稳定,在我们现实生活中应用很广泛,在实验中我们利用的电学知识,设计制造了一种直流稳压电源。本文简要介绍了这种直流稳压电源波形演示器的设计目的和电路原理,重点阐述了它的制作流程、滤波和稳压原理以及性能测试输出波形。     

A finite model property for RMImin

It is proved that the variety of relevant disjunction lattices has the finite embeddability property. It follows that Avron's relevance logic RMI _min has a strong form of the finite model property, so it has a solvable deducibility problem. This strengthens Avron's result that RMI _min is decidable. (© 2006 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Sub(L)中的五边形格特征及其数量不等式

五边形结构在刻画格的特征方面具有十分重要作用，应用格论及组合数学的方法讨论了格L与其子格格Sub(L)中所含五边形格之间的数量关系，给出了有限格L的子格格中三个元生成五边形格的充要条件，同时给出了Sub(L)所含不同五边形格数量的一个下界。     

Localization effects and measure source terms in numerical schemes for balance laws

This paper investigates the behavior of numerical schemes for nonlinear conservation laws with source terms. We concentrate on two significant examples: relaxation approximations and genuinely nonhomogeneous scalar laws. The main tool in our analysis is the extensive use of weak limits and nonconservative products which allow us to describe accurately the operations achieved in practice when using Riemann-based numerical schemes. Some illustrative and relevant computational results are provided.

     

有界变量线性规划的基线算法

本文对有界变量线性规划的算法进行了研究，得到了一种解此问题的新算法。文中根据基线算法的算法原理，通过对BL表的旋转，在各变量满足界约束的条件下，使目标函数值不断增大，直至得到有界硬上界，从而得到问题的最优解。文中给出了有界变量线性规划基线算法的计算步骤，并给出了一个例子。与单纯形法相比，采用基线算法解有界变量线性规划操作更简单。迭代次数少，解题速度更快。     

高折射率椭圆芯布拉格光纤的偏振特性

应用带完全匹配层边界条件的全矢量有限元方法,分析了高折射率椭圆芯布拉格光纤的偏振特性,详细讨论了光纤结构参量对模式双折射度以及群速度走离的影响,结果发现:高折射率椭圆芯布拉格光纤的模式双折射度可达10-2量级,比传统保偏光纤至少高出一个量级,并且表现出不同于传统保偏光纤的群速度走离特性;在保持较高双折射度的同时,通过合理的结构设计,可在一定的波长处灵活地获得较大的群速度走离或零走离特性,具有重要的潜在应用价值;最后,简要分析了低折射率区域的折射率变化对偏振特性的影响;研究结果有助于设计高性能的微结构保偏光纤。     

Semi‐analytical integration of the 8‐node plane element stiffness matrix using symbolic computation

The semi‐analytical integration of an 8‐node plane strain finite element stiffness matrix is presented in this work. The element is assumed to be super‐parametric, having straight sides. Before carrying out the integration, the integral expressions are classified into several groups, thus avoiding duplication of calculations. Symbolic manipulation and integration is used to obtain the basic formulae to evaluate the stiffness matrix. Then, the resulting expressions are postprocessed, optimized, and simplified in order to reduce the computation time. Maple symbolic‐manipulation software was used to generate the closed expressions and to develop the corresponding Fortran code. Comparisons between semi‐analytical integration and numerical integration were made. It was demonstrated that semi‐analytical integration required less CPU time than conventional numerical integration (using Gaussian‐Legendre quadrature) to obtain the stiffness matrix. © 2005 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq, 2006     

Acoustic reflection from a baffled elastic/piezoelectric plate

A finite difference/boundary integral procedure to determine the acoustic reflected pressure from a fluid-loaded bi-laminated plate is described. The bi-laminate is composed of a piezoelectric layer and an elastic layer in contact with the fluid, and is held by an acoustically hard baffle. In the numerical model, the fluid pressure at fluid/solid interface is replaced by a continuum of point sources weighted by the normal acceleration of the elastic plate, and the governing equation system is solved in the solid domain. With the normal acceleration found, the reflected pressure in the fluid is determined by an integral expression involving the Green's function. It is demonstrated that an appropriate applied voltage potential across the piezoelectric layer has the effect of cancelling either the reflected or scattered pressure of the plate at any chosen field points in the fluid. Project supported by the National Natural Science Foundation of China (No. 10172039).     

Numerical solution of the three‐dimensional parabolic equation with an integral condition

Developement of numerical methods for obtaining approximate solutions to the three dimensional diffusion equation with an integral condition will be carried out. The numerical techniques discussed are based on the fully explicit (1,7) finite difference technique and the fully implicit (7,1) finite difference method and the (7,7) Crank‐Nicolson type finite difference formula. The new developed methods are tested on a problem. Truncation error analysis and numerical examples are used to illustrate the accuracy of the new algorithms. The results of numerical testing show that the numerical methods based on the finite difference techniques discussed in the present article produce good results. © 2002 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq 18: 193–202, 2002; DOI 10.1002/num.1040